An Introduction to Compressible Flow
暫譯: 可壓流動入門

Ames, Forrest E., Tang, Clement C.

An Introduction to Compressible Flow
  • 出版商: CRC
  • 出版日期: 2023-07-24
  • 售價: $2,150
  • 貴賓價: 9.5 折 $2,043
  • 語言: 英文
  • 頁數: 284
  • 裝訂: Quality Paper - also called trade paper
  • ISBN: 0367697793
  • ISBN-13: 9780367697792

    • 海外代購書籍(需單獨結帳)

商品描述

An Introduction to Compressible Flow, Second Edition covers the material typical of a single-semester course in compressible flow. The book begins with a brief review of thermodynamics and control volume fluid dynamics, then proceeds to cover isentropic flow, normal shock waves, shock tubes, oblique shock waves, Prandtl-Meyer expansion fans, Fanno-line flow, Rayleigh-line flow, and conical shock waves.

The book includes a chapter on linearized flow following chapters on oblique shocks and Prandtl-Meyer flows to appropriately ground students in this approximate method. It includes detailed appendices to support problem solutions and covers new oblique shock tables, which allow for quick and accurate solutions of flows with concave corners.

The book is intended for senior undergraduate engineering students studying thermal-fluids and practicing engineers in the areas of aerospace or energy conversion. This book is also useful in providing supplemental coverage of compressible flow material in gas turbine and aerodynamics courses.

　

商品描述(中文翻譯)

《可壓縮流動導論（第二版）》涵蓋了可壓縮流動單學期課程的典型內容。該書首先簡要回顧熱力學和控制體積流體動力學，然後進一步探討等熵流、正常激波、激波管、斜激波、普朗特-邁耶擴張扇、法諾線流、雷利線流以及圓錐激波。

本書包含一章線性化流動，該章位於斜激波和普朗特-邁耶流之後，以適當地幫助學生掌握這一近似方法。書中還附有詳細的附錄以支持問題解決，並涵蓋新的斜激波表，這使得對於具有凹角的流動能夠快速且準確地解決。

本書適合學習熱流體的高年級本科工程學生以及在航空航天或能量轉換領域的實踐工程師。這本書也對於在燃氣渦輪和空氣動力學課程中提供可壓縮流動材料的補充內容非常有用。

作者簡介

Forrest Ames has been Professor of Mechanical Engineering at the University of North Dakota (UND) for the last 22 years. Dr. Ames began his career at Allison Gas Turbine Div. of General Motors where he worked in the research laboratories. Dr. Ames has conducted research in the area of gas turbine heat transfer and aerodynamics for over 35 years. At UND, Dr. Ames is responsible for teaching in the thermal fluids area of mechanical engineering and regularly teaches classes on compressible flow, aerodynamics, gas turbines, thermodynamics, computational fluid dynamics, convective heat transfer and fluid dynamics. Dr. Ames has been a member of the Heat Transfer Committee of the International Gas Turbine Institute for over 20 years. He has been a regular contributor to ASME Turbo Expo technical sessions as author, presenter, reviewer and session organizer in the areas of turbine aerodynamics and heat transfer. He is a Fellow of the ASME.

Clement Tang is an Associate Professor of Mechanical Engineering at the University of North Dakota (UND). He joined UND as a faculty member in 2011. Dr. Tang has research experience in the area of multiphase flow heat transfer and aerodynamics of thin flexible materials. He has been conducting experimental research in gas-liquid two-phase flow heat transfer for over 15 years. At UND, Dr. Tang has taught compressible flow, heat and mass transfer, heat conduction & radiation, HVAC, mechanical measurements, multiphase flow heat transfer, and thermodynamics.

作者簡介(中文翻譯)

Forrest Ames 在北達科他州立大學 (UND) 擔任機械工程教授已有 22 年。Ames 博士的職業生涯始於通用汽車的艾利森燃氣渦輪部門，當時他在研究實驗室工作。Ames 博士在燃氣渦輪的熱傳遞和空氣動力學領域進行了超過 35 年的研究。在 UND，Ames 博士負責教授機械工程的熱流體領域，並定期教授可壓縮流、空氣動力學、燃氣渦輪、熱力學、計算流體力學、對流熱傳遞和流體動力學等課程。Ames 博士已擔任國際燃氣渦輪學會熱傳遞委員會成員超過 20 年。他在 ASME Turbo Expo 技術會議中，作為作者、演講者、審稿人和會議組織者，定期貢獻於渦輪空氣動力學和熱傳遞的領域。他是 ASME 的會士。

Clement Tang 是北達科他州立大學 (UND) 的機械工程副教授。他於 2011 年加入 UND 擔任教職。Tang 博士在多相流熱傳遞和薄柔性材料的空氣動力學方面擁有研究經驗。他在氣-液兩相流熱傳遞方面進行了超過 15 年的實驗研究。在 UND，Tang 博士教授可壓縮流、熱質傳遞、熱傳導與輻射、暖通空調 (HVAC)、機械測量、多相流熱傳遞和熱力學等課程。

類似商品