Ultra-Low Voltage Circuit Techniques for Energy Harvesting
暫譯: 超低電壓電路技術於能量收集

Radin, Rafael Luciano, Machado, Marcio Bender, Sawan, Mohamad

Ultra-Low Voltage Circuit Techniques for Energy Harvesting
  • 出版商: Springer
  • 出版日期: 2022-07-22
  • 售價: $3,530
  • 貴賓價: 9.5 折 $3,354
  • 語言: 英文
  • 裝訂: Hardcover - also called cloth, retail trade, or trade
  • ISBN: 3031044916
  • ISBN-13: 9783031044915

    • 海外代購書籍(需單獨結帳)

相關主題

商品描述

This book provides design-oriented models for the implementation of ultra-low-voltage energy harvesting converters, covering the modeling of building blocks such oscillators, rectifiers, charge pumps and inductor-based converters that can operate with very low supply voltages, typically under 100 mV. Analyses based on the diode and MOSFET models are included in the text to allow the operation of energy harvesters from voltages of the order of 100 mV or much less, with satisfactory power efficiency. The practical realization of different converters is also addressed, clarifying the design trade-offs of ultra-low voltage (ULV) circuits operating from few millivolts.

  • Offers readers a state-of-the-art revision for ultra-low voltage (ULV) energy harvesting converters;
  • Provides analog IC designers with proper models for the implementation of circuits and building blocks of energy harvesters, such as oscillators, rectifiers, and inductor-based converters, operating under ultra-low voltages;
  • Addresses the design of energy harvesters operating from ultra-low voltages, enabling autonomous operation of connected devices driven by human energy;
  • Demonstrates design and implementation of integrated ULV up-converters;
  • Includes semiconductor modeling for ULV operation.

商品描述(中文翻譯)

這本書提供了針對超低電壓能量收集轉換器的設計導向模型，涵蓋了如振盪器、整流器、充電泵和基於電感的轉換器等基本構件的建模，這些轉換器可以在非常低的供電電壓下運作，通常低於100 mV。文本中包含基於二極體和MOSFET模型的分析，以便能量收集器能夠在約100 mV或更低的電壓下運行，並達到令人滿意的功率效率。書中還探討了不同轉換器的實際實現，澄清了在幾毫伏下運行的超低電壓（ULV）電路的設計權衡。

- 提供讀者超低電壓（ULV）能量收集轉換器的最新修訂；
- 為類比IC設計師提供適當的模型，以實現超低電壓下運行的能量收集器電路和基本構件，如振盪器、整流器和基於電感的轉換器；
- 討論在超低電壓下運行的能量收集器的設計，使得由人類能量驅動的連接設備能夠自主運作；
- 演示集成ULV升壓轉換器的設計和實現；
- 包含ULV運作的半導體建模。

作者簡介

Rafael L. Radin received the M.Sc. and Ph.D. degrees in Electrical Engineering from the Federal University of Santa Catarina (UFSC), Florianópolis, SC, Brazil, in 2008 and 2021 respectively. In 2016, he was a visiting Ph.D. student at the Polystim Laboratory, Polytechnique Montreal, Canada. His current research is focused on the design of ultra-low voltage energy harvesting converters and power management for IoT and wearable applications.

Marcio Bender Machado received the M.Sc. and Ph.D. degrees in Electrical Engineering from the Federal University of Santa Catarina, Brazil in 2006 and 2014, respectively. From 2006 to 2017 he was with the Instituto Federal Sul-Rio-Grandense, and since 2017 he is professor in the Federal Institute of Sao Paulo, Brazil. In 2013, he was a visiting Ph.D. student at the Polystim Laboratory at École Polytechnique d Montréal, Canada. He was awarded the 2015 best Brazilian Ph.D. Thesis in Microelectronics. His current research is focused on the design of ultra-low-voltage electronics and energy harvesting circuits.

Mohamad Sawan received the Ph.D. degree in 1990 in Electrical Engineering, from Sherbrooke University, Canada. He is a Chair Professor Founder and Director of the Center of Excellence for Biomedical Research And INnovation (CenBRAIN) in Westlake University, Hangzhou, China. He is Emeritus Professor of Microelectronics and Biomedical Engineering and he is founder and director of the Polystim Neurotech Laboratory in Polytechnique Montréal. He was leading the Microsystems Strategic Alliance of Quebec (1991-2019). Dr. Sawan is Vice-President Publications (2019-Present) of the IEEE CAS Society. Dr. Sawan received several awards, among them the Queen Elizabeth II Golden Jubilee Medal, the Shanghai International Collaboration Award, the Chinese Qianjiang Friendship Ambassador Award, and The Chinese Zhejiang Westlake Friendship Award. He is Fellow of the IEEE, Fellow of the Canadian Academy of Engineering, Fellow of the Engineering Institute of Canada, and Officer of the Quebec's National Order.

Carlos Galup-Montoro studied engineering sciences at the University of the Republic, Montevideo, Uruguay, and electronic engineering at the National Polytechnic School of Grenoble (INPG), France. He received the Engineering degree in electronics and a Ph.D. degree from INPG, in 1979 and 1982, respectively. From 1982 to 1989, he worked at the University of São Paulo, Brazil. Since 1990, he has been with the Electrical Engineering Department, Federal University of Santa Catarina, Florianópolis, Brazil, where he is currently a Professor. In the second semester of the academic year 1997-1998, he was a Research Associate with the Analog Mixed Signal Group, Texas A&M University. He was a Visiting Scholar at UC Berkeley, from 2008 to 2009, and at IMEP/INPG in the first trimester of 2017.

Márcio C. Schneider received B. E. and M. S. degrees in electrical engineering from the Federal University of Santa Catarina (UFSC) in 1975 and 1980, respectively, and a doctoral degree in electrical engineering from University of São Paulo, São Paulo, Brazil, in 1984. In 1976, he joined the Electrical Engineering Department of UFSC, where he is now a professor. In 1995, he spent a one-year sabbatical at the Electronics Laboratory of the Swiss Federal Institute of technology, Lausanne. In 1997 and 2001, he was a Visiting Associate Professor at Texas A&M University.

 

作者簡介(中文翻譯)

拉斐爾·L·拉丁於2008年和2021年分別獲得巴西聖卡塔琳娜聯邦大學（UFSC）電機工程碩士和博士學位。2016年，他曾在加拿大蒙特利爾理工學院的Polystim實驗室擔任訪問博士生。他目前的研究專注於超低電壓能量收集轉換器的設計以及物聯網和可穿戴應用的電源管理。

馬爾西奧·本德·馬查多於2006年和2014年分別獲得巴西聖卡塔琳娜聯邦大學的電機工程碩士和博士學位。從2006年到2017年，他在南里奧格朗德聯邦學院工作，自2017年起擔任巴西聖保羅聯邦學院的教授。2013年，他曾在加拿大蒙特利爾理工學院的Polystim實驗室擔任訪問博士生。他於2015年獲得最佳巴西微電子博士論文獎。他目前的研究專注於超低電壓電子學和能量收集電路的設計。

穆罕默德·薩萬於1990年在加拿大舍布魯克大學獲得電機工程博士學位。他是西湖大學生物醫學研究與創新卓越中心（CenBRAIN）的創始講座教授和主任。他是微電子學和生物醫學工程的名譽教授，也是蒙特利爾理工學院Polystim神經科技實驗室的創始人和主任。他曾領導魁北克微系統戰略聯盟（1991-2019）。薩萬博士是IEEE CAS學會的出版副會長（2019年至今）。薩萬博士獲得多項獎項，包括伊莉莎白二世女王金禧獎章、上海國際合作獎、中國錢江友誼大使獎和中國浙江西湖友誼獎。他是IEEE會士、加拿大工程學院會士、加拿大工程學會會士，以及魁北克國家勳章的官員。

卡洛斯·加盧普-蒙托羅在烏拉圭蒙得維的亞的共和國大學學習工程科學，並在法國格勒諾布爾國立工藝學校（INPG）學習電子工程。他於1979年和1982年分別獲得INPG的電子工程學位和博士學位。從1982年到1989年，他在巴西聖保羅大學工作。自1990年以來，他一直在巴西聖卡塔琳娜聯邦大學的電機工程系任教，目前擔任教授。在1997-1998學年的第二學期，他曾在德克薩斯農工大學的類比混合信號組擔任研究助理。他於2008年至2009年在加州大學伯克利分校擔任訪問學者，並於2017年第一季度在IMEP/INPG擔任訪問學者。

馬爾西奧·C·施奈德於1975年和1980年分別獲得巴西聖卡塔琳娜聯邦大學（UFSC）的電機工程學士和碩士學位，並於1984年在聖保羅大學獲得電機工程博士學位。1976年，他加入UFSC的電機工程系，現為教授。1995年，他在瑞士聯邦理工學院洛桑校區的電子實驗室度過了一年的休假。1997年和2001年，他曾在德克薩斯農工大學擔任訪問副教授。

類似商品