商品描述
Tribological Aspects of Additive Manufacturing provides a technical discussion on the roles of the 3D printing process for processing polymeric-, metallic-, and ceramics-based additive manufactured products in order to improve the tribological properties. It explores design flexibility, waste minimization, and cost reduction.
商品描述(中文翻譯)
《增材製造的摩擦學方面》提供了關於3D列印過程在處理聚合物、金屬和陶瓷基增材製造產品中改善摩擦學特性的技術討論。它探討了設計靈活性、廢料最小化和成本降低。
作者簡介
Dr. Rashi Tyagi is currently working as an assistant professor in University Centre for Research and Development at Chandigarh University. Dr. Tyagi has won CII MILCA AWARD in the field of tribology of electrical discharge coating in 2022. She has completed her PhD in mechanical engineering from the Indian Institute of Technology (Indian school of mines), Dhanbad, India. Her PhD work was focused on surface modification by an electrical discharge process for solid lubrication and enhanced tribological performance. She has completed her MTech from IIT(ISM), Dhanbad, India. She has done her MTech project on the fiber laser cladding of TiN+SS 304 powder to enhance tribological performance. She has published over 21 SCI articles in peer-reviewed international journals, conference proceedings, and book chapters as a first author in the field of 3D printing and tribology of coatings. She has published two articles in Tribology International. She is also a reviewer in several SCI and Scopus indexed journals. She is currently working on tribology of fiber reinforce composite prepared by fused filament fabrication, fused deposition modeling, thermoplastic polymers, and natural and synthetic composites.
Dr. Ranvijay Kumar is an assistant professor in University Centre for Research and Development, Chandigarh University. He has received a PhD in mechanical engineering from Punjabi University, Patiala. Additive manufacturing, shape memory polymers, smart materials, friction-based welding techniques, advance materials processing, polymer matrix composite preparations, reinforced polymer composites for 3D printing, plastic solid waste management, thermosetting recycling, and destructive testing of materials are the skills of Dr. Kumar. He has won prestigious CII MILCA award 2020. He has co-authored more than 55 research papers in science citation indexed journals and 38 book chapters and has presented 20 research papers in various national/international level conferences. He has contributed extensively in Additive Manufacturing literature with publications appearing in the Journal of Manufacturing Processes, Composite Part: B, Rapid Prototyping Journal, the Journal of Thermoplastic Composite Materials, Measurement, Proceedings of the Institution of Mechanical Engineers, Part C(iMeche Part C), Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, the Journal of Thermoplastic Composite Materials, Materials Research Express, Proceedings of the National Academy of Sciences, India Section A: Physical Sciences, the Journal of Central South University, the Journal of the Brazilian Society of Mechanical Sciences and Engineering, Composite Structures, CIRP Journal of Manufacturing Science and Technology, etc. He is the editor of book Additive Manufacturing for Plastic Recycling: Efforts in Boosting A Circular Economy publishing in CRC Press (Taylor and Francis).
Dr. Nishant Ranjan is working as Assistant Professor at the University Centre for Research and Development of Chandigarh University. Fused deposition modeling; extrusion; thermoplastic polymers; composition of thermoplastic polymers; natural and synthetic biopolymers; scaffolds printing; 3D printing technology; thermal, mechanical, morphological, and chemical properties of thermoplastic polymers; biocompatible and biodegradable fillers; and reinforcement of materials are the main focused area of Dr. Nishant Ranjan. He has co-authored more than 20 research papers in science citation indexed journal, 1 book, and 27 book chapters and has presented 14 research papers in various international/national level conferences. He has been reviewing research articles of various peer-reviewed SCI and Scopus indexed journals.
作者簡介(中文翻譯)
拉希·泰亞基博士目前在昌迪加爾大學的研究與發展中心擔任助理教授。泰亞基博士於2022年獲得CII MILCA獎，表彰其在電氣放電塗層摩擦學領域的貢獻。她在印度工業技術學院（印度礦業學院）丹巴德完成了機械工程的博士學位。她的博士研究專注於通過電氣放電過程進行表面改性，以實現固體潤滑和增強的摩擦學性能。她在丹巴德的IIT（ISM）完成了碩士學位，並在碩士專案中研究了TiN+SS 304粉末的光纖激光覆蓋，以提高摩擦學性能。她作為第一作者在3D列印和塗層摩擦學領域發表了超過21篇SCI文章，並在Tribology International上發表了兩篇文章。她還擔任多本SCI和Scopus索引期刊的審稿人。目前，她正在研究通過熔融纖維製造、熔融沉積建模、熱塑性聚合物以及天然和合成複合材料製備的纖維增強複合材料的摩擦學。
蘭維賈伊·庫馬爾博士是昌迪加爾大學研究與發展中心的助理教授。他在旁遮普大學（Patiala）獲得機械工程博士學位。庫馬爾博士的專業技能包括增材製造、形狀記憶聚合物、智能材料、基於摩擦的焊接技術、高級材料加工、聚合物基複合材料的製備、用於3D列印的增強聚合物複合材料、塑料固體廢物管理、熱固性回收以及材料的破壞性測試。他於2020年獲得了著名的CII MILCA獎。他共同撰寫了超過55篇科學引文索引期刊的研究論文和38章書籍，並在各種國內/國際會議上發表了20篇研究論文。他在增材製造文獻中做出了廣泛貢獻，發表的文章出現在Journal of Manufacturing Processes、Composite Part: B、Rapid Prototyping Journal、Journal of Thermoplastic Composite Materials、Measurement、Proceedings of the Institution of Mechanical Engineers、Part C(iMeche Part C)、Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine、Journal of Thermoplastic Composite Materials、Materials Research Express、Proceedings of the National Academy of Sciences, India Section A: Physical Sciences、Journal of Central South University、Journal of the Brazilian Society of Mechanical Sciences and Engineering、Composite Structures、CIRP Journal of Manufacturing Science and Technology等期刊。他是即將由CRC Press（Taylor and Francis）出版的書籍Additive Manufacturing for Plastic Recycling: Efforts in Boosting A Circular Economy的編輯。
尼尚特·蘭詹博士在昌迪加爾大學的研究與發展中心擔任助理教授。其主要研究領域包括熔融沉積建模、擠出、熱塑性聚合物、熱塑性聚合物的組成、天然和合成生物聚合物、支架列印、3D列印技術、熱、機械、形態和化學性質的熱塑性聚合物、生物相容性和可生物降解的填料以及材料的增強。他共同撰寫了超過20篇科學引文索引期刊的研究論文、1本書和27章書籍，並在各種國際/國內會議上發表了14篇研究論文。他一直在審閱各種同行評審的SCI和Scopus索引期刊的研究文章。
