Raspberry Pi Camera Module 3 Wide | 樹莓派官方原廠相機模組 V3 廣角版
- 廠商: 電子套件/開發板
- 上市日期: 2023-01-19
- 售價: $1,550
- 貴賓價: 9.8 折 $1,519
- 貨號: 10720000874
立即出貨 (庫存 < 4)
買這商品的人也買了...
-
$408Intel Edison 智能硬件開發指南 — 基於 Yocto Project
-
$1,100$1,045 -
$500$390 -
$4,770$4,532 -
$662中文版 CorelDRAW 2021 完全自學教程
-
$699$594 -
$2,070$1,967 -
$764Adobe Premiere Pro 2021經典教程(彩色版)
-
$1,680$1,596 -
$3,380$3,211 -
$714$678 -
$650$507 -
$1,220$1,159 -
$399$379 -
$500$475 -
$680$537 -
$4,330$4,114 -
$5,210$4,950 -
$600$450 -
$820$648 -
$2,900$2,755
相關主題
商品描述
機模組 V3 廣角版
The Raspberry Pi Camera Module 3 is the latest entry in the Official Raspberry Pi range of camera
modules, offering a new 12 Megapixel Sony IMX708 image sensor, powered autofocus, improved low-
light sensitivity and HDR (High Dynamic Range) support!
The new Camera Module 3 is available with a standard 75° or wide-angle 120° lens (select version
before adding to cart), giving you more options for your specific project needs. As with the previous
generation, we also have an infrared-sensitive NoIR version available for night photography.
The module is capable of 4608×2592 pixel images and 4608×2592 @14 FPS/2304×1296 @56
FPS/1536×864 @120FPS video. When HDR is enabled, the resolution is limited to 2304×1296 @ 30
FPS.
《Compatibility (Important!)》
The Camera Module 3 is mechanically identical to the previous Camera Module V2 apart from
the front sensor section. The new sensor is larger and may not fit all previous camera
accessories
We are in the process of updating each camera accessory in the store to indicate compatibility
within the product descriptions
Software
The Camera Module 3 can only be used with libcamera – the previous raspistill/raspivid
libraries will not work
You will need to update Raspberry Pi OS as the Camera Module 3 requires a new driver and
a specific version of libcamera
Boards
The Camera Module 3 is compatible with all Raspberry Pi boards with a camera connector
(CSI connector)
To use this camera with a Raspberry Pi Zero (which has a smaller connector), you will need to
use an adapter cable
《Features》
Back-illuminated and stacked CMOS 12-megapixel image sensor (Sony IMX708)
High signal-to-noise ratio (SNR)
Built-in 2D Dynamic Defect Pixel Correction (DPC)
Phase Detection Autofocus (PDAF) for rapid autofocus
QBC Re-mosaic function
HDR mode (up to 3-megapixel output)
CSI-2 serial data output
2-wire serial communication (supports I2C fast mode and fast-mode plus)
2-wire serial control of focus mechanism
《Specifications》
Sensor: Sony IMX708
Resolution: 11.9 megapixels
Sensor size: 7.4mm sensor diagonal
Pixel size: 1.4μm × 1.4μm
Horizontal/vertical: 4608 × 2592 pixels
Common video modes: 1080p50, 720p100, 480p120
Output: RAW10
IR cut filter: Integrated
Autofocus system: Phase Detection Autofocus
Dimensions: 25 × 24 × 11.5mm (12.4mm height for Wide variants)
Ribbon cable length: 150mm
Cable connector: 15 × 1mm FPC
Compliance:
o FCC 47 CFR Part 15, Subpart B, Class B Digital Device
o Electromagnetic Compatibility Directive (EMC) 2014/30/EU
o Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU
Production lifetime: Raspberry Pi Camera Module 3 will remain in production
until at least January 2030
《Lens Specifications》
Effective focal length 2.75mm
f/2.2
Diagonal field of view 120 degrees (at 16:9)
35mm equivalent focal length roughly 16mm (full width) – 18mm (3:2 crop)
Focus 5cm – infinity
《Resources》
Product Brief:https://datasheets.raspberrypi.com/camera/camera-module-3-product-brief.pdf
Raspberry Pi Camera Information
Page:https://www.raspberrypi.com/documentation/accessories/camera.html
Libcamera information
page:https://www.raspberrypi.com/documentation/computers/camera_software.html#libcamera-
and-libcamera-apps
Installing a Raspberry Pi
Camera:https://www.raspberrypi.com/documentation/accessories/camera.html#installing-a-
raspberry-pi-camera